Monthly reminder - Topic guidelines for AHDTV Fore-note: Please be aware that you can set your subscription to "daily digest", and then you will get a maximum...
ahdtv@yahoogroups.com
Dec 1, 2004 1:15 pm
13772
I'm in the Vinings headend and I was having trouble with 804 last night. It used to happen frequently, but had stopped until last night. Just after 10p, it...
I am in W. Cobb and on Sunday and part of Monday had no INHD 1 or 2. I have a 6412 btw. Yesterday, I set up to record the Peter Gabriel concert in INHD and it...
i'm also getting that weird splitscreen on HD channels with the 6312 when i turn the projector back on after a while.... ... I am in W. Cobb and on Sunday and...
I'll got to Radio Shack on my lunch break and buy the LCD 8-in-1. So, can you please post or link to directions on how to program it? Chris ... certain ... ...
OK. I've purchased the Radio Shack 8-in-1 LCD model #: 15-2116. Can you please link or post the instructions for programming it with the 30 second skip code? ...
Are you using the dvi cable? I think it's a communication issue because the tv needs to do the "digital handshake" with the box through the dvi. It's not a...
... I am running 4.3% overscan setup via template and FOX is running their stuff REAL close to the edge. It sure looks like they are exceeding the safe zone....
I don't have either dvi or the 6208, but a friend does and has a problem. His 6208 is connected via dvi to his display. He says it works for the HD channels...
Yep, using the DVI. Its only happened once. Its no biggy. When I had Voom and you changed between HD and SD channels you often didn't get audio, you had to go...
If your TV has PIP you can split the coax before it gets to the 6412 and connect to an antenna in connection. You'll get the basic cable feed on that and can...
That is not normal. I had a 6208 and have a 6412 connected via DVI and I can view every channel. I can also view every channel through the component output. It...
I have that setup and it works fine, but it does not support HD PIP. Since the output on the DVI port is the same as the component port, there is no way to use...
After you follow the directions in the book to program the remote's CABLE key with device code 0476 (for Motorola cable boxes), then do the following: LCD...
Don't forget to check WPBA-DT 30-1 (or 21-1 for the PSIP challenged) tonight. Not sure about the time but there is a national PBS HD show scheduled for 9 pm....
You are "the Man", Thomas! That worked like a charm I was planning on taking the RS remote back for a refund, but now I think I'll keep it. It's nice to have a...
-It appears youguys are experiencing what I went through last week during the head end switch... 6 DAYS of unwatchable digital channels from 301 up to and...
DO I need to utilize both of these cable boxes I have today? I have both a digital cable box and NOW an HD cable box from my service provider . I want to use...
If you don't have a serial port then you have to use the IR blaster to change channels on the HD cable box. It comes with the Tivo. One end plugs into the IR...
I don't know if this has been covered before. But I was watching Lost (ABC) on my standard basic cable last night (Adelphia). This should be the SD ...
... This will work with your display because it is native 1080I only. Other displays may be native 480P/1080I in which case checking the 480P side with a 480P...
We were told some cable companies are using the digital feed for their SD channels (cropped and converted to stereo obviously). Specifically that was the...
After taking time off from work to wait all morning for my Comcast Technician to arrive between 8-11, they finally show up at 11:05. At least they did show....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
