Hi, I am about to buy some masonite for the J2 consoles (radar,etc). I have some thickness dimensions for a few parts but not sure about the others, such as...
 Hello,   I have worked with Masonnite it is a tempered board material the 1/8 or 1/4 thicknesses  from my experience a circular power saw is needed to...
It always looked whiteish on the old series but DOCTOR WHO's classic consoles were actually light green I learned from the proboards Tardis web group! Some...
Great work, Chris, Will you be making the dimesnions available on this forum for anyone who can't afford the run to make up their own replicas? Dave B ... -- ...
Bill, You can't really cut Masonite with a knife it's too hard. Use a jig saw or circular saw. Be careful it makes a lot of dust with a circular saw. Elmer's...
I made a blueprint of the cut down radar input panel, and thought it was already in the files, but will post it to the files when I get back from vacation. ...
I have a limited number of Cosmic Radiation meters available. (Limited because the meters are made with 40+ year old vintage parts that have not been readily...
0-25 DC volts is spoken for. And to clarify, the price is for a completed meter as shown in the photos. Chris ... From: LostinSpaceProps@yahoogroups.com ...
Hi, I've put another autographed steel plate from Bob Kinoshita's 95th birthday up for auction on eBay. (95Th Birthday photos available in our group area.) ...
Finally !!!! http://fabgearusa.com/jupiter_2_kit_from_moebius_models.html Here now is the Jupiter 2, the culmination of nearly ten years of extensive research...
I was just searching through the site for information on the astrogator, when I came upon this post. I'm the one who did the original LISA blueprint of the...
Can someone who has built the navigation console tell me what kind of lights did you use for the two side panels (not below the scope). Part #'s etc. And if...
This was from an older message: (Pat was so creative in that what others see as trash, Pat sees as a Jupiter 2 knob or light or robot part. His knobs were pop...
I have just put up the first page of the Sage Radar Input Panel files. It is located in the CAD Files section. Over the next few days, I will add the...
The original one page file has been replaced with a 7 page file of the same name. I welcome feedback/criticism of the file. If you can see any changes that...
I have started work on the large Burroughs Panel. Again, It is placed in the CAD Files section under "BURROUGHS PANEL". Thank you for the reference photo,...
Thank you for your kind words, Bill. I have thought about completing the entire main flight console as a set of A2 or A1 sheets, though I don't know where in...
-Pat, Can you tell me the height the center console dailights? I know that they are 1.5 inches wide. I am fashioning some out of odd materials. Thanks, as...
Hi Bill, The height of the base is 1/2" plus about another 3/8" as the lense curves up. I used Gatorade caps for my center console lights. The lenses were...
Hey Pat isnt necessity the mother of invention. [or at least adaption] why else would people use pop caps for knobs and thermostat collars for light rings, i'd...
Point well taken Scott, I think it's called prop building recession toughness. Pat ... From: scottboydo To: LostinSpaceProps@yahoogroups.com Sent: Saturday,...
Hey all, I am currently working on the Inertial Guidance system for one of the members here, and was wondering if anyone had any idea what tilt mechanism was...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
